The production of vertical high-speed injection molding machines is a very complex process. There are many temperatures that need to be noted during the manufacturer's production process. These temperatures have a significant impact on the shaping of the product, which is a key factor. During the production process of a vertical high-speed injection molding machine, attention should be paid to the following temperatures: material temperature, oil temperature, and mold temperature.
Vertical high-speed injection molding machine
In the production process of a vertical high-speed injection molding machine, due to the continuous movement of the equipment, the hydraulic oil in the equipment will constantly rub against each other, generating more and more heat, and increasing the oil temperature. Therefore, during the production process, it is necessary to check the oil temperature in a timely manner to maintain a normal temperature of around -45 ° C. If the oil temperature is too low or too high, it will have various impacts on the pressure transmission of the system and affect normal production.servo type injection molding machine
Material temperature is also an issue that needs to be noted, and material temperature is commonly referred to as barrel temperature, which generally depends on the specific requirements of the materials and products used. In the production process of vertical high-speed injection molding machines, the material temperature changes continuously with different production needs, so it needs to be adjusted in a timely manner, but it cannot exceed the standard temperature requirements. In addition, it is necessary to consider the cycle and materials..precision core parts,
Mold temperature is also an important reference temperature and parameter in the production of vertical high-speed injection molding machines. The temperature of the mold has a significant impact on the product's shaping and compliance with standards. Therefore, when setting the mold temperature, it is necessary to consider product factors, not just temperature requirements, which will affect the normal and orderly progress of each process, and the standard rate of the produced product will be very low.household plastic mold.
by eleven