Injection molding machine is a processing machine widely used in industrial production, also known as injection molding machine or injection molding machine. When using injection molding machines, it is of course important to pay attention to environmental protection and energy conservation. What are the differences between servo injection molding machines and ordinary injection molding machines in terms of environmental protection and energy conservation?
Ordinary injection molding machines generally use electric motors to drive hydraulic machine motors. After starting, the motor and motor work continuously at full output power and full load. Therefore, looking at the main parameters written on the general injection molding machine, the motor output power is prominently stated, which is the specific energy consumption of the general injection molding machine.
The high-precision BMC injection molding machine is different from ordinary injection molding machines, which depends on the advanced servo motor intelligent driving motor used by the injection molding machine to carry out work. For example, in the production and manufacturing of a certain product, the production time must be thirty seconds, and the pressure maintaining refrigeration must be fifteen seconds. The servo motor is not in operation during the cooling time of the pressure maintaining technique, that is, it only works for fifteen seconds, which saves electricity during the cooling time of the pressure maintaining technique.
The calculation methods for the electricity consumption rate of injection molding machines and ordinary injection molding machines are as follows: ordinary injection molding machines: motor output power+electric heating power=specific electricity consumption; Servo injection molding machine: motor output power * 0.5+electric heating power * 0.4=specific electricity consumption. Therefore, professional BMC injection molding machines have an energy saving rate of 30-70% compared to regular machines.
Why is there such a big difference in environmental protection and energy conservation between high-end BMC injection molding machines and regular injection molding machines? Usually, their motors are different. The motor of a general injection molding machine: Continuously running, even if the machine equipment has already stopped working, the motor is still in working state. Servo injection molding machine motor: Each different type of posture requires corresponding output power to increase power. If the machine equipment is already in a stagnant state, the injection molding machine motor may stop working. In specific application situations, machine equipment is generally not always in operation, so if the motor of the injection molding machine is suspended, it will save a lot of electricity. Every little makes a mickle, and all produced servo injection molding machines are definitely much more environmentally friendly and energy-saving than general injection molding machines.
by eleven